Adjusting the instrument light brightness

Aprilia Futura – Setting the dash

Aprilia helpfully point out that you shouldn’t attempt any of these while on the move.

Adjusting the instrument light brightness

This one’s quite fiddly. You can adjust the classy blue backlighting on the clocks between three settings – 100%, 60% and 25%.

Before switching on the ignition, turn the lights to ‘on’ and switch them to dip. Then turn the key to the on position and, within three seconds, press the Set button to toggle between the three settings.

This may take a few attempts. If you’re too late, you’ll be switching between total mileage and trip mileage. If this is the case, switch off and try again.